5
Strenx Tube 700MH
Advanced high-strength structural hollow sections

Strenx® Tube 700MH

Advanced high-strength structural hollow sections

Strenx® Tube 700MH is an HF-welded cold-formed structural hollow section made of hot-rolled high-strength steel with a minimum yield strength of 700 MPa.

Its high strength combined with naturally stiff form of welded hollow section enables construction of stronger and lighter structures. Strenx® Tube 700MH meets or exceeds the requirements of prEN 10219 (2016) and it is CE marked according to EN 1090-2. Typical applications include load-bearing structures in the lifting, handling and transportation segments.

Strenx® Tube 700MH is available in circular, square and rectangular shapes. Other shapes and sizes are available upon request.

The maximum length of the tubes is 12-18 meters, depending on the size. Longer or cut-to-length tubes are available upon request.

Hot dip galvanizing Strenx® Tube 700MH hollow sections may lead to cracking. Please consult SSAB Tech Support prior galvanization.

Mittavalikoima

Strenx Tube 700MH -teräsputkea on saatavana pyöreänä, neliönä ja suorakulmaisena. 

Pyöreä 42,4–323,9 mm
Neliö 40 x 40–300 x 300 mm
Suorakulmainen 50 x 30–400 x 200 mm
Seinämän paksuus      2,0–10,0 mm
Pituus 6 000–12 000/18 000 mm

Muita muotoja ja kokoja on saatavana pyynnöstä.

Saatavilla olevat standardit

EN 10219-2

EN 1090-2

Valitse muoto, jotta voit näyttää ominaisuudet