5
Strenx Tube 700MLH
Advanced high-strength structural hollow sections

Strenx® Tube 700MLH

Advanced high-strength structural hollow sections

Strenx® Tube 700MLH is an HF-welded cold-formed structural hollow section made of hot-rolled high-strength steel with a minimum yield strength of 700 MPa.

Its high strength combined with naturally stiff form of welded hollow section enables construction of stronger and lighter structures. Strenx® Tube 700MLH meets or exceeds the requirements of prEN 10219 (2016) and it is CE marked according to EN 1090-2. Typical applications include load-bearing structures in the lifting, handling and transportation segments, especially in conditions that require extremely good toughness.

Strenx® Tube 700MLH is available in circular, square and rectangular shapes. Other shapes and sizes are available upon request.

The maximum length of the tubes is 12-18 meters, depending on the size. Longer or cut-to-length tubes are available upon request.

Hot dip galvanizing Strenx® Tube 700MLH hollow sections may lead to cracking. Please consult SSAB Tech Support prior galvanization.

Mittavalikoima

Strenx Tube 700MLH -teräsputkea on saatavana pyöreänä, neliönä ja suorakulmaisena. 

Pyöreä 42,4–323,9 mm 
Neliö 40 x 40–300 x 300 mm 
Suorakulmainen 50 x 30–400 x 200 mm 
Seinämän paksuus 3,0–10,0 mm
Pituus 6 000–12 000/18 000 mm

Muita muotoja ja kokoja on saatavana pyynnöstä.

Saatavilla olevat standardit

EN 10219-2

EN 1090-2

Valitse muoto, jotta voit näyttää ominaisuudet